Alternator Wiring Testing

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem

Topic author
lewiswhitmore524
Full Member
Full Member
Posts: 142
Joined: 02/07/15 23:42
Gender: Male
Years of MR2 Ownership: 4
MR2's Owned: 1
Real Name: Lewis

Re: Alternator Wiring Testing

Post by lewiswhitmore524 » 12/06/19 21:59

What I'll do, is reassemble the harness and mark each splice with a band of coloured/white tape and upload that picture once the harness is back in the engine. Might be easier for a KY2 article.

Sure Jimi, anything that can help out is good.

The splice locations are actually in the BGB but i'll still update with a picture once its installed for the more visual among us.

3S-GTE
Image

I believe the problem splices are E23 and E25 where the loom sits above the intake manifold. I'll double check and update though.



User avatar

jimi
Administrator
Administrator
Posts: 3595
Joined: 17/05/04 1:00
Gender: Male
Years of MR2 Ownership: 14
MR2's Owned: 1
Location: Glenrothes: The Kingdom of Fife
Contact:

Re: Alternator Wiring Testing

Post by jimi » 12/06/19 23:31

lewiswhitmore524 wrote:
12/06/19 21:59
What I'll do, is reassemble the harness and mark each splice with a band of coloured/white tape and upload that picture once the harness is back in the engine. Might be easier for a KY2 article.

Sure Jimi, anything that can help out is good.
:clapping:
Spot on, I'll update the KY2 article with an extra section to include your pics, findings and acknowledgement. :th:
It's not an uncommon problem on MK2's so I'm sure t will be of great use to other owners :cool1:
Black is not a colour ! .... Its the absence of colour
Image

User avatar

abovetherim
Posts: 789
Joined: 29/01/11 18:53
Gender: Male
Years of MR2 Ownership: 8
MR2's Owned: 1
Real Name: Jan Olsson
Location: Leicester

Re: Alternator Wiring Testing

Post by abovetherim » 13/06/19 22:11

Fyi for the noise filter, on my na it's bolted to the rear bulkhead by the coil bracket.
1991 rev 1 T Bar n/a 3sge import. A work in progress!!!


Topic author
lewiswhitmore524
Full Member
Full Member
Posts: 142
Joined: 02/07/15 23:42
Gender: Male
Years of MR2 Ownership: 4
MR2's Owned: 1
Real Name: Lewis

Re: Alternator Wiring Testing

Post by lewiswhitmore524 » 18/06/19 9:26

OK. Wiring Harness has been repaired now. I cut out the crusty looking corroded splices and re-crimped them using an open barrel splice. This was then sealed in with some adhesive lined heat shrink. I wrapped the loom using a mixture of non-adhesive vinyl tape, and fabric type loom wrap.

Here is the end result. I found it difficult when putting the loom back together to find a decent reference picture for how the loom should look, which wires branch off where etc, so this picture can be added somewhere for reference material.
YP37CKk - Imgur.jpg
The white tape marks the places where the splices are located within the loom. Note that I didn't remove the original loom binding in the section leading up to the fuse box connections. There could be further splices here, but i decided i'd leave them alone. Other than that section, I've had the entire loom apart.

The most corroded splices (and the one that was completely broken) were found in the section with the two white bands to the left of the manifold loom tunnel. This is where the majority of the splices are found ( i think i re-did 5-6 splices in this area)

This is the area of loom that drops down below the coolant connectors to the throttle body, and the loom forms a low-point when installed. My thinking is that this is the area where the water collects off the rest of the loom and drips from, and can become saturated with water. This penetrates the 25 year old splices and corrodes the connectors. Toyota use a sheet of what looks like adhesive lined tape folded in half, to cover their splices. All the ones i had removed, the adhesive was crusty and dry. Definitely age related deterioration. With new, tighter fitting adhesive heat shrink installed, i'm hoping this repair will now be good for another 25 years. :th:
IByRE6z - Imgur.jpg
Here is everything buttoned back up again after installation. As a side note, I finished the job with no bolts left over. The car also started first time with no connectors forgotten to be plugged in. Alternator is now charging a strong 14+ volts when running. First engine related job of this nature I've done so it's been a learning curve, but pleased with how the results came out nonetheless.
You do not have the required permissions to view the files attached to this post.

User avatar

peteV6R5
Full Member
Full Member
Posts: 2652
Joined: 13/08/07 13:06
Gender: Male
Years of MR2 Ownership: 12
MR2's Owned: 2
Real Name: Pete
Location: Stratford upon Avon

Re: Alternator Wiring Testing

Post by peteV6R5 » 18/06/19 9:54

Nice work Lewis, very good work and very useful info... be great if Jimi gets this put into a useful guide in KY2
Image
Highland Drive 13/14/15/17/18/19
JAE 07/09/10/11/12/13/14/15/16/17
Japfest 09/11/12/13/16/19
Wales runs 14/15/16/17/18

User avatar

SonicSW20
Regional Rep
Regional Rep
Posts: 2802
Joined: 29/11/10 19:50
Years of MR2 Ownership: 0
MR2's Owned: 1
Location: Essex

Re: Alternator Wiring Testing

Post by SonicSW20 » 18/06/19 10:27

Very tidy, can you work on mine? :laughing
Rev5 Sonic Shadow
Image


Topic author
lewiswhitmore524
Full Member
Full Member
Posts: 142
Joined: 02/07/15 23:42
Gender: Male
Years of MR2 Ownership: 4
MR2's Owned: 1
Real Name: Lewis

Re: Alternator Wiring Testing

Post by lewiswhitmore524 » 18/06/19 10:44

SonicSW20 wrote:
18/06/19 10:27
Very tidy, can you work on mine? :laughing
You know, i actually really enjoy working on cars. I just lack some of the tools that make bigger jobs easier. MR2OC syndicate rent a unit with a 2post lift? :clapping: :laughing
I accidentally a tubby.

User avatar

SonicSW20
Regional Rep
Regional Rep
Posts: 2802
Joined: 29/11/10 19:50
Years of MR2 Ownership: 0
MR2's Owned: 1
Location: Essex

Re: Alternator Wiring Testing

Post by SonicSW20 » 18/06/19 10:49

lewiswhitmore524 wrote:
18/06/19 10:44
SonicSW20 wrote:
18/06/19 10:27
Very tidy, can you work on mine? :laughing
You know, i actually really enjoy working on cars. I just lack some of the tools that make bigger jobs easier. MR2OC syndicate rent a unit with a 2post lift? :clapping: :laughing
If we all lived closer to each other I would 100% be up for that!
Rev5 Sonic Shadow
Image

Post Reply

Return to “MK2”