Tick over Revs Too high

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
The forum Administrator has chosen to advise you that this topic is 3 years and 4 months old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Topic author
IanMorphecusStevens
Posts: 3
Joined: 12/12/16 7:42
Years of MR2 Ownership: 5
MR2's Owned: 1
Real Name: Ian
Gender: Male
Location: Leamington Spa

Tick over Revs Too high

Post by IanMorphecusStevens »

I've just finished a complete re-build of my MKIII Roadster 1.8 engine...
Back in and all running, just a couple of niggles to address...

One of which is that the tick over is as tho the 'choke' is still activated, all the time -running at about 1300rpm.

Previously it was always bang on 1300rpm on start and then around 800/900 on normal tick over.

When I plugged in the computer to check it, the revs indicated showed that it should be between 1300/1500! So something is telling the computer that it's correct and something is telling the engine to turn over at that rate....

Anyone know where I should start?
Thanks,
Ian


Top

Quick Reply

   
The forum Administrator has chosen to advise you that this topic is 3 years and 4 months old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Return to “MK3”