MK2 sill repair
-
- Administrator
- Posts: 5168
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 45 times
- Been thanked: 116 times
- Contact:
Re: MK2 sill repair
Email me the PDF's and I'll upload them to our server download section and then post a link to download them
-
- Administrator
- Posts: 5168
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 45 times
- Been thanked: 116 times
- Contact:
Re: MK2 sill repair
Many thanks to Trevor for making his templates available to everyone
You can now download them from this link MK2 Sill Repair Templates
You can now download them from this link MK2 Sill Repair Templates
-
Topic author
Re: MK2 sill repair
Hi Trev,
about to get the sills on my Rev 1 T-bar replaced and want to pass the templates onto the guys doing the metal work (I can barely change a bulb!) but I notice that there are no dimensions? Any clues re paper/image size for the PDF documents as I want to make sure they print out at the correct size!
Thanks in advance,
Rik
about to get the sills on my Rev 1 T-bar replaced and want to pass the templates onto the guys doing the metal work (I can barely change a bulb!) but I notice that there are no dimensions? Any clues re paper/image size for the PDF documents as I want to make sure they print out at the correct size!
Thanks in advance,
Rik
-
Topic author
Re: MK2 sill repair
Have downloaded the templates so many thanks to Trevor, will now fabricate them & the 2 will live againjimi wrote:Many thanks to Trevor for making his templates available to everyone
You can now download them from this link MK2 Sill Repair Templates
-
Topic author
Re: MK2 sill repair
My daily runner lives again
I tried to get the sills fabricated but due to the fact that I only wanted one set the cost was too much. My son in law recommended Blitz Bodyshop in Fareham, it's only a small place (2 people) & they have done an amazing job
The rot inside was almost terminal & had spread further than originally estimated
Blitz replaced all the sills using the templates & stone-chipped them too all for 390!
Thanks again to Trev
I tried to get the sills fabricated but due to the fact that I only wanted one set the cost was too much. My son in law recommended Blitz Bodyshop in Fareham, it's only a small place (2 people) & they have done an amazing job
The rot inside was almost terminal & had spread further than originally estimated
Blitz replaced all the sills using the templates & stone-chipped them too all for 390!
Thanks again to Trev
-
Topic author
Re: MK2 sill repair
Are the pdf templates uploaded on this site?
I have been searching and cannot find them anywhere?
Kind Regards
Phil
I have been searching and cannot find them anywhere?
Kind Regards
Phil
-
- Administrator
- Posts: 5168
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 45 times
- Been thanked: 116 times
- Contact:
-
Topic author
Re: MK2 sill repair
Hi . I've just finished reading through this write up and it's extremely helpful. However, the sill templates don't seem to be where the link takes me to. Can anyone help me find them please?
-
- Administrator
- Posts: 5168
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 45 times
- Been thanked: 116 times
- Contact:
Re: MK2 sill repair
The link works fine for me.
Look at the top of the page, there's a link named Downloads, follow that link to the Downloads section, then click Technical Stuff / MK2 / MK2 Sill Repair Templates.
Look at the top of the page, there's a link named Downloads, follow that link to the Downloads section, then click Technical Stuff / MK2 / MK2 Sill Repair Templates.
-
- Posts: 735
- Joined: 03/11/10 20:07
- Current Model: None
- Years of MR2 Ownership: 10
- MR2's Owned: 2
- Real Name: Brian
- Gender: Male
- Location: Barnoldswick
- Has thanked: 5 times
- Been thanked: 5 times
Re: MK2 sill repair
6 years on i still look at this thread one of the best ever
& a top bloke to do the PDFs for others to use
& a top bloke to do the PDFs for others to use
"That's a Negative Jim..I Do Not Have The Measles!"
-
- Administrator
- Posts: 5168
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 45 times
- Been thanked: 116 times
- Contact:
Re: MK2 sill repair
Indeed Brian, it was very good of Trevor to make them available They are still downloaded regularly, almost every week
Just been through thread and sorted the download links (some of them were out of date)
Anyone who has trouble getting the links to work can always go directly to Downloads via the top menu link
Just been through thread and sorted the download links (some of them were out of date)
Anyone who has trouble getting the links to work can always go directly to Downloads via the top menu link