Rev2 swap ABS question

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
The forum Administrator has chosen to advise you that this topic is 4 years and 1 month old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Topic author
Hubcio
Posts: 7
Joined: 28/05/17 20:02

Rev2 swap ABS question

Post by Hubcio »

Hi all,

With some help from the forum gurus I've managed to complete my rev2 3sgte swap. The only thing remaining is the ABS light on the dashboard and I'm not sure whether it is possible to connect ABS after this conversion..

Body loom is the original rev4 NA and the engine harness is the rev2 3sgte, I have noticed that there is an unoccupied ABS pin in the turbo ECU:

https://ibb.co/zSMhSdp

However I don't see where that wire should be going from, and reading diagrams didn't tell me much. Has anyone ever done this before?

Cheers


Top

Quick Reply

   
The forum Administrator has chosen to advise you that this topic is 4 years and 1 month old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Return to “MK2”