Page 1 of 1
Wheel fitment
Posted: 07/10/18 22:05
by Luke2152
Looking at a set of wheels for my new to me mk2 turbo. They are cheap, a style I like, and I plan to do a diy refurb on them.
Size is 17X8 front and 17X9 rear. Both with a 35 offset. I plan to run 215/40 front and 235/40 rear. Car is slightly lowered on coilovers.
Can anyone confirm if they will fit. I think they will but only just. Maybe with a bit of work on the wheel arch?
Thanks!
Re: Wheel fitment
Posted: 07/10/18 22:10
by SonicSW20
Yes, they will fit fine.
The only thing you *might* have to do is add a small amount of camber at the hub at the front for a bit more clearance between the wheel and the coilover. It depends on the coilover, some are a little wider than others.
Re: Wheel fitment
Posted: 08/10/18 8:50
by peteV6R5
Gazza_DJ wrote: ā07/10/18 22:10
Yes, they will fit fine.
The only thing you *might* have to do is add a small amount of camber at the hub at the front for a bit more clearance between the wheel and the coilover. It depends on the coilover, some are a little wider than others.
agree same fitment as mine, but I would suggest running 245/40/17 on the rear not the 235 you have in post.
215/40/17 front is just right
Re: Wheel fitment
Posted: 08/10/18 9:36
by Luke2152
peteV6R5 wrote: ā08/10/18 8:50
Gazza_DJ wrote: ā07/10/18 22:10
Yes, they will fit fine.
The only thing you *might* have to do is add a small amount of camber at the hub at the front for a bit more clearance between the wheel and the coilover. It depends on the coilover, some are a little wider than others.
agree same fitment as mine, but I would suggest running 245/40/17 on the rear not the 235 you have in post.
215/40/17 front is just right
Well i already have those 235 size tyres from something else so makes sense to use them. Cheers for the confirmation both of you.
Re: Wheel fitment
Posted: 08/10/18 18:03
by vinp182
Iād go with a 245 tyre too
Re: Wheel fitment
Posted: 08/10/18 18:11
by SonicSW20
Yeah, 245 is perfect. May need to roll the rear a little, depends on ride height and camber. Might as well use a good 235/40 if you have one already though.
Re: Wheel fitment
Posted: 08/10/18 18:46
by TonyleFrog
235mm tyres are closer than 245mm to the OEM rolling radius which affects the speedo reading.
They will fit but bear in mind that it's the minimum advisable width tyre for a 9J wheel.
https://www.tyres-pneus-online.co.uk/ty ... dvice.html