Welcome to Know Your 2
A repository of knowledge for all things MR2 related

Info:- Alloy Wheel Fitment Data.

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

5 stud

That is 5 nuts per wheel.

PCD 114.3

Pitch Circle Diameter. The diameter of the circle the bolt holes are spaced round. 114.3mm is the measurement on many 5 stud Japanese cars.

ET 38 to 42mm.

ET is the distance between the centreline of the rim and an imaginary line where the rim comes in contact with the cars hub. It is also known as Offset. 38mm to 42mm is normal. Offsets up to 45mm have been used as have offsets as low as 29mm but brake calliper clearance may be an issue.

Centre Bore 60.1mm

Bore is the size of the lip on the cars hub. It is essential that the wheel sits snugly on the hub as this lip balances the wheel centrally. This means the wheel nuts do not centre the wheels. If the bore is not correct, wheel vibration will be felt. Most wheel manufacturers will provide spigot rings that allow alloy wheels casting to be as universal as possible.

Peter Jones

Copyright © by MR2 Owners Club All Right Reserved.

Print Email

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.