where to put axle stands
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
-
Topic author
where to put axle stands
basically decided to do a lot more jobs than time scaled aloud and my baby will have to go on axle stands for a few days maybe a week as i dont really trust my jack or sills where would i put axle stands but still allow me to be able to work on the suspension, brakes and control rods
-
Topic author
Re: were to put axle stands
I've put them on the inner sills, directly inboard of the scissor jack mounting points, where the A and B pillars meet the sills.
In that position, on 4 stands, the MR2 is pretty unstable, so, if you can, grab another pair, one underneath each crossmember (or use tyres, etc.). The problem is with rocking back and forth.
In that position, on 4 stands, the MR2 is pretty unstable, so, if you can, grab another pair, one underneath each crossmember (or use tyres, etc.). The problem is with rocking back and forth.
-
- Posts: 1212
- Joined: 23/08/06 1:00
- Years of MR2 Ownership: 6
- MR2's Owned: 6
- Real Name: trevor
- Gender: Male
- Location: leicester
Re: were to put axle stands
Best bet is 2 sets of car ramps pointing inwards to each other ,with a scaffold plank spanning them, at the front and rear of the sills
or put the axle stands on the chassis sections, not on the sills
or put the axle stands on the chassis sections, not on the sills
-
- Posts: 2346
- Joined: 23/08/08 23:44
- Years of MR2 Ownership: 6
- MR2's Owned: 9
- Gender: Male
- Location: Preston, Lancashire
Re: were to put axle stands
I fit them on the front on the arb bush, on the rear on the subframe. Very stable
'94 Mk2 Rev 3 GT-S 295 fwhp @1.2 bar
'93 Mk2 Rev 2 GT-S 296 fwbhp @ 0.9bar
'93 Mk2 Rev 2 GT-S 296 fwbhp @ 0.9bar