I need help with my nuts
-
- Posts: 525
- Joined: 09/08/06 1:00
- Years of MR2 Ownership: 7
- MR2's Owned: 3
- Location: Stroud, gloucestershire
Re: I need help with my nuts
Thanks for the help Shinny, as the TSW's take normal tuner nuts I have a nice shiney new set in the garage Earlier in the year, I found that a few of the wheel nuts had rounded slightly on rev1 when I had my BK'S fitted, so I bought a new set of nuts..... then I bought the new wheels which came with new nuts.
Hopefully should be able to get them swapped over ready for JAE, I hope you and Ant manage to get some from somewhere
Hopefully should be able to get them swapped over ready for JAE, I hope you and Ant manage to get some from somewhere
1990 Rev1 GLimited T-Bar Black = Gone but not forgotten
1998 Rev5 N/A Cosmos Blue = Sold
1995 Rev3 GT-S T-Bar Goodwood Green =
1998 Rev5 N/A Cosmos Blue = Sold
1995 Rev3 GT-S T-Bar Goodwood Green =
Re: I need help with my nuts
Got two sets of Muteki's one closed one open.
Go for the closed as the open one have gone off a little.
Closed set are in chrome and with a little M.
But sadly all from the US so time is against you
Go for the closed as the open one have gone off a little.
Closed set are in chrome and with a little M.
But sadly all from the US so time is against you
Re: I need help with my nuts
HI guys.
I am hoping to by a set of wheel nuts at JAE anyways, but I am missing one nut of my rear wheel, if anyone has a spare alloy wheel nut I could have a lend of until i find a set I would appreciate it. The tapered kind, not stock.
See you at JAE
I am hoping to by a set of wheel nuts at JAE anyways, but I am missing one nut of my rear wheel, if anyone has a spare alloy wheel nut I could have a lend of until i find a set I would appreciate it. The tapered kind, not stock.
See you at JAE
Re: I need help with my nuts
any wheel/tyre shop should be able to sell you one, probably cost £1 if you get desperateMattRoss1313 wrote:HI guys.
I am hoping to by a set of wheel nuts at JAE anyways, but I am missing one nut of my rear wheel, if anyone has a spare alloy wheel nut I could have a lend of until i find a set I would appreciate it. The tapered kind, not stock.
See you at JAE
-
- Posts: 4507
- Joined: 07/05/06 1:00
- Years of MR2 Ownership: 12
- MR2's Owned: 6
- Real Name: Mark
- Gender: Male
- Location: Reading, UK
- Been thanked: 2 times
- Contact:
Re: I need help with my nuts
MGMgrand wrote:Got two sets of Muteki's one closed one open.
Go for the closed as the open one have gone off a little.
Closed set are in chrome and with a little M.
But sadly all from the US so time is against you
Well, this will suit Ant: http://cgi.ebay.com/ebaymotors/MUTEKI-L ... ccessories
I can't find any blue ones on ebay tho
I have been offered a set of Rays Volk Formula nuts for £118 tho...
-
- Posts: 525
- Joined: 09/08/06 1:00
- Years of MR2 Ownership: 7
- MR2's Owned: 3
- Location: Stroud, gloucestershire
Re: I need help with my nuts
I will have some spares Matt, will pop some of the better ones in the glove box for you. Will you be ok without it until JAE ?
1990 Rev1 GLimited T-Bar Black = Gone but not forgotten
1998 Rev5 N/A Cosmos Blue = Sold
1995 Rev3 GT-S T-Bar Goodwood Green =
1998 Rev5 N/A Cosmos Blue = Sold
1995 Rev3 GT-S T-Bar Goodwood Green =
Re: I need help with my nuts
Kei Racing tuner nuts... in the UK too.
http://cgi.ebay.co.uk/x20-Alloy-Wheel-T ... 634.c0.m14
I bought a set from this seller and had no problems in the deal.
http://cgi.ebay.co.uk/x20-Alloy-Wheel-T ... 634.c0.m14
I bought a set from this seller and had no problems in the deal.
-
- Posts: 4507
- Joined: 07/05/06 1:00
- Years of MR2 Ownership: 12
- MR2's Owned: 6
- Real Name: Mark
- Gender: Male
- Location: Reading, UK
- Been thanked: 2 times
- Contact:
Re: I need help with my nuts
Hmm - that might just tempt me from importing some blue MutekisZZW30 wrote:Kei Racing tuner nuts... in the UK too.
http://cgi.ebay.co.uk/x20-Alloy-Wheel-T ... 634.c0.m14
I bought a set from this seller and had no problems in the deal.
-
Topic author - Posts: 235
- Joined: 04/03/09 18:59
- Gender: Male
- Location: Bristol
Re: I need help with my nuts
I've decided to go for some open end Mutekis. I need some as my current ones are frankly embarrassing. I'm hoping they'll arrive in time
304.2 bhp and feelin good...............
whitworthmike wrote:I had a two minute fiddle with it after playing with hm for most of the evening.....
-
Topic author - Posts: 235
- Joined: 04/03/09 18:59
- Gender: Male
- Location: Bristol
Re: I need help with my nuts
Mutekis are here!
Better get them fitted pronto!
Better get them fitted pronto!
304.2 bhp and feelin good...............
whitworthmike wrote:I had a two minute fiddle with it after playing with hm for most of the evening.....
-
- Posts: 4507
- Joined: 07/05/06 1:00
- Years of MR2 Ownership: 12
- MR2's Owned: 6
- Real Name: Mark
- Gender: Male
- Location: Reading, UK
- Been thanked: 2 times
- Contact:
Re: I need help with my nuts
I still don't have them!!James7 wrote:Shinny - which nuts did you get??
The Mutekis I tried to import form the USA, but they didn't have any in stock either. I'm currently waiting for these 7-sided nuts from Hong Kong: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0473082598
-
- Posts: 182
- Joined: 01/01/08 21:40
- Years of MR2 Ownership: 10
- MR2's Owned: 2
- Real Name: Andy
- Gender: Male
- Location: Swindon, Wiltshire
Re: I need help with my nuts
As some may remember from japfest, i purchased some of these D1 spec nuts and to be honest...i love them!,so light and fit on to my long studs perfectly. bit pricey, but ya get what you pay for
Re: I need help with my nuts
Was following this thread as I was after a new set of nuts for the Advan AVS Model 5's that I bought and am waiting to get powdercoated. Really like the ones that you've bought so had a look for them and they also do them in silver. Will check the sizes against my alloys and if everythings ok will order a set as well. Have you got locking wheel nuts as well and if so were did you get them from?? Just call me a copy catShinny wrote:The Mutekis I tried to import form the USA, but they didn't have any in stock either. I'm currently waiting for these 7-sided nuts from Hong Kong: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0473082598
Saw these on Ebay and they also caught my eye but unfortunately they are open ended. Look very niceMrAndy wrote:As some may remember from japfest, i purchased some of these D1 spec nuts and to be honest...i love them!,so light and fit on to my long studs perfectly. bit pricey, but ya get what you pay for